SACC-CI-M12MS-8CON-L180 THR

https://www.phoenixcontact.com/gb/products/1552269 Flush-type connector - SACC-CI-M12MS-8CON-L180 THR - 1552269 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Sensor/actuator flush-type plug, 8-pos., with straight THR solder connection, only contact insert Why buy this product  Reduced mounting costs thanks to two-piece device connector  Packaging available for automated pick and place assembly  All common pin assignments and codings available  Easy device integration thanks to mechanical port screw connections with threaded attachment, press-in contour or direct integration in the front plate  Additional gasket for the device when not plugged in Key Commercial Data Packing unit 60 STK Minimum order quantity 60 STK GTIN GTIN 4046356162104 Weight per Piece (excluding packing) 3.640 g Custom tariff number 85366990 Country of origin Germany Technical data Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (without mechanical actuation) Degree of protection IP67 (correctly plugged in and locked) General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using 01/11/2017   Page 1 / 7 https://www.phoenixcontact.com/gb/products/1552269 Flush-type connector - SACC-CI-M12MS-8CON-L180 THR - 1552269 Technical data General a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 2A Rated voltage 30 V Rated surge voltage 0.8 kV Number of positions 8 Insulation resistance ≥ 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Status display No Overvoltage category II Degree of pollution 3 Connection method THR solder connection Insertion/withdrawal cycles > 100 Torque 3 Nm ... 4 Nm (Installation-side) Mounting type PCB mounting Type of packaging Tray Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PPA Sealing material FKM / EPDM Cable Standards/specifications M12 connector IEC 61076-2-101 Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation) -25 °C ... 85 °C (cable, flexible installation) Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Flammability rating according to UL 94 V0 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 01/11/2017   Page 2 / 7 https://www.phoenixcontact.com/gb/products/1552269 Flush-type connector - SACC-CI-M12MS-8CON-L180 THR - 1552269 Schematic diagram Drilling diagram Ø5,5 49 ° Ø1 4,5 5 6x 66° Pin assignment M12 plug, 8-pos., view plug side 8,5 Ø1,4 Drilling diagram Dimensional drawing 18,8 2,5 Ø9,3 Ø0,8 1,5 M12 male connector contact carrier Dimensional drawing 230 20 28 6 155 22 5,2 THR tray packaging Classifications eCl@ss eCl@ss 4.0 27250313 eCl@ss 4.1 27250313 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27143423 01/11/2017   Page 3 / 7 https://www.phoenixcontact.com/gb/products/1552269 Flush-type connector - SACC-CI-M12MS-8CON-L180 THR - 1552269 Classifications eCl@ss eCl@ss 7.0 27449001 eCl@ss 8.0 27440103 eCl@ss 9.0 27440102 ETIM ETIM 3.0 EC002061 ETIM 4.0 EC002062 ETIM 5.0 EC002061 ETIM 6.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 39121413 Approvals Approvals Approvals UL Recognized / cUL Recognized / EAC / cULus Recognized Ex Approvals Approval details UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm     mm²/AWG/kcmil 26-20 Nominal current IN 2A Nominal voltage UN 30 V  FILE E 118976 01/11/2017   Page 4 / 7 https://www.phoenixcontact.com/gb/products/1552269 Flush-type connector - SACC-CI-M12MS-8CON-L180 THR - 1552269 Approvals cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm     mm²/AWG/kcmil 26-20 Nominal current IN 2A Nominal voltage UN 30 V  FILE E 118976 EAC      B.01742 cULus Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   Accessories Accessories Contact insert Sample set - SACC-CIM12MS8PL180THRSHSAMPLE - 1413553 Sensor/actuator flush-type plug, 8-pos., shielded, with straight THR solder connection     Panel mounting base Housing screw connection - SACC-M12-SCO PLUG - 1551493 M12 SPEEDCON housing screw connection for M12 male inserts, with O-ring, for all SPEEDCON-capable THR and wave soldering contact carriers     Housing screw connection - SACC-DSIV-M12-PLUG - 1416145 Housing screw connection with M12 standard thread, with O-ring, for the two-piece straight M12 THR contact carrier and for the two-piece angled M12 contact carrier     01/11/2017   Page 5 / 7 https://www.phoenixcontact.com/gb/products/1552269 Flush-type connector - SACC-CI-M12MS-8CON-L180 THR - 1552269 Accessories Housing screw connection - SACC-M12-SCO PLUG L90 - 1436709 M12-SPEEDCON housing screw connection for M12 male inserts, with flat gasket, for all Speedcon-compatible THR and wave soldering contact carriers     Housing screw connection - SACC-BP-M-M12/M15-6-THR - 1413997 Housing screw connection, PlugLink:M12, Rear mounting, M15 x 1     Housing screw connection - SACC-BP-M-M12/M15-7-THR - 1413996 Housing screw connection, PlugLink:M12, Rear mounting, M15 x 1     Housing screw connection - SACC-BP-M-M12/M15-6-THR SCO - 1413999 Housing screw connection, PlugLink:M12-SPEEDCON, Rear mounting, M15 x 1     Housing screw connection - SACC-BP-M-M12/M15-7-THR SCO - 1413998 Housing screw connection, PlugLink:M12-SPEEDCON, Rear mounting, M15 x 1     01/11/2017   Page 6 / 7 https://www.phoenixcontact.com/gb/products/1552269 Flush-type connector - SACC-CI-M12MS-8CON-L180 THR - 1552269 Accessories Housing screw connection - SACC-M12 PLUG PRESS - 1437892 M12 pin, housing screw connection, press-in version, for all Speedcon-compatible THR and wave soldering contact carriers     Housing screw connection - SACC-DSIV-M12-PLUG-9 THR - 1417984 Housing screw connection with M12 standard thread, with O-ring, for the two-piece straight M12 THR contact carrier and for the two-piece angled M12 contact carrier     Protective cap Sealing cap - PROT-M12 FS - 1560251 M12 sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field     Sealing cap - PROT-M12 FS-M - 1430488 M12 metal sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field     Phoenix Contact 2017 © - all rights reserved http://www.phoenixcontact.com 01/11/2017   Page 7 / 7